GEM v3.0 - v3.1 Driver Installation Instructions
See the SpeedSTAR-24 Manual for detailed installation information.
_______________________________________________________________________

[1] ... Make a diskcopy of GEM System Master Disk (v3.0), or the Master
    Disk (v3.1). This copy will be used in place of the original during 
    installation.  Copy the setup file information (GEMSETUP.V30 or 
    GEMSETUP.V31) to the new disk. 
    (ie. COPY C:\SS24\GEM\GEMSETUP.V30 B:GEMSETUP.TXT) 

[2] ... Format a  blank disk in Drive A: by typing:   C:FORMAT A: /V

[3] ... When prompted for the Volume label, enter: GEM SCREEN2 <Enter>

[4] ... Copy the following files from GEM/3 Screen Disk #2 to the newly
    formatted disk (both v3.0 and v3.1).  The following examples assume
    GEM Disk #2 to be drive A: and the new disk to be in Drive A:

       COPY A:GEMVDI.EXE B: <Enter>
       COPY A:MDGEM?.SYS B: <Enter>

[6] ... Copy the SpeedSTAR-24 screen drivers to the newly formatted disk
    by typing:  COPY C:\SS24\GEM\SD*.VGA B:

[7] ... Install GEM as instructed in the GEM manual using IBM 16-color
    VGA for PS/2 (640x480) as the video driver.  Verify operation of GEM.

[8] ... Reinsert the GEM System Master and use GEMPREP to select the 
    SpeedSTAR option for 800x600 or 1024x768.

                    ... Press a key to continue ...
